LilyGO TTGO T5-4.7 E-Paper Weather Station

Emmanuel Odunlade
499 Views
easy
Tested
SKU: EL130921
Quote Now

The LILYGO T5 4.7 inch E-Paper ESP32 Development Board is an exciting 4.7″ e-paper display integrated with an ESP32 WiFi/Bluetooth module. The board’s processor is ESP32-WROVER-E with 16MB of FLASH memory and 8MB of PSRAM. The ESP32 module supports Wi-Fi 802.11 b/g/n and Bluetooth V4.2+BLE and can easily be programmed with Arduino IDE, VS Code, or ESP-IDF. The board can be purchased on Alliexpress for 38.33 EUR + shipping or Tindie for 28.13 + shipping. This display is ideal for building a weather station that will fetch weather data from OpenWeatherMap via simple API usage. So in this tutorial, we will follow the steps to make a weather station like the photo above. We will work on a Windows PC to program the display, but the same can be done in Linux or Mac OS.

Specifications

MCU: ESP32-WROVER-E (ESP32-D0WDQ6 V3)
FLASH: 16MB
PRAM: 8MB
USB to TTL: CP2104
Connectivity: Wi-Fi 802.11 b/g/n & Bluetooth V4.2+BLE
Onboard functions: Buttons: IO39+IO34+IO35+IO0, Battery Power Detection
Power Supply: 18650 Battery or 3.7V lithium Battery (PH 2.0 pitch)
Driver IC: GDEH0213B72
4.7 inches, 540(H)X960(V) resolution, , supports partial refresh
6pin FPC touchscreen expansion connector
16 Gray Level ED047C1
4-pin 2.0 Molex 4 p 53015-0410 x 3
RST button x 1
Custom button x 3
USB: TYPE-C
Battery charge and discharge protection chip
USB input power [email protected]
4pin expansion interface output is 3.3V
Sleep mode [email protected]~170uA

Requirements

First of all, we will need to install the USB to Serial (CH343) Drivers if we don’t have this done previously. Depending on your Windows version you will need:

Windows 8, and 10 users need to install https://www.wch.cn/download/CH343SER_EXE.html (page is in Chinese but you only need a click to get the driver download)
Windows 11 will install the driver automatically.

Download and install Arduino IDE 2.0

Arduino IDE Configuration

Add ESP32 boards support

Click File, click Preferences, and select the Settings tab. Enter the following URL to Additional boards manager URLs: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json

Click Ok.

Next click Tools, and select Boards: -> Boards Manager . It will open the left pane with a list of boards. Type ESP32 into the search field. Find ESP32 by Espressif Systems, and click Install.

Preparing the Code

Download LilyGo-EPD47 library to the C:\Users\YOUR_USERNAME\Documents\Arduino\libraries folder on your system:

Download and extract LilyGo-EPD-4-7-OWM-Weather-Display to your directory with Arduino projects. This directory is normally located in C:\Users\YOUR_USERNAME\Documents\Arduino.

The project folder name should match the name of the source code file (OWM_EPD47_epaper_v2.5). This is done to avoid the unnecessary step of moving the files later.

Open Arduino IDE 2.0, click File, -> Sketchbook, -> OWM_EPD47_epaper_v2.5.

The sketch requires ArduinoJson Library to successfully build.

Click Tools, ->Manage libraries. The pane with Library Manager will open, then type ArduinoJson into the search field. Find ArduinoJson by Benoit Blanchon, click Install.

Then click the tick button on the top menu to compile the code. If everything is successful it should show:

Once you verify that the code is compiled you can move on to the next step.

Configuring Parameters

Open the file owm_credentials.h and configure ssid, password, apikey, City, and Country.

The project is fetching data from openweathermap.org so you will need to create a new free account in order to get API key.

Power Saving

The project code supports power saving, so if you’re flashing in the early before 08.00 or after 23.00, you might notice that nothing appears on the display.

To change the power-saving options open file OWM_EPD47_epaper_v2.5.ino and change WakeupHour and SleepHour to a value that suits your schedule.

Uploading the Code

Connect the LilyGO T5 4.7-inch e-paper display to your PC-> Select the board from the dropdown in the toolbar. Search for the ESP32 Wrover module and click Ok.

Click the Upload button.

If the flashing is successful, your weather will be displayed on the e-paper like the photos below.