The nanoCH32V003 is a RISC-V dev board available for $1.50
HardwareProductsTop Stories

The nanoCH32V003 is a RISC-V dev board available for $1.50

nanoCH32V003 is a development board that was created by MuseLab and is based on CH32V003F4U6, which was manufactured by QinHeng. On the board are a reset button, an LED, and a crystal oscillator that operates at 24 MHz. The 1-wire serial debug interface (SDI) is supported, and all of...

Continue Reading
1.156
Views
0 Comments
EDATEC CM4 Sensing Computer For IoT & Data Acquisition applications
IoTTop Stories

EDATEC CM4 Sensing Computer For IoT & Data Acquisition applications

The Internet of Things (IoT) is changing the way we interact with the world around us by connecting devices and systems in ways that were never before possible. With the growth of IoT solutions, there is an increasing need for smart and reliable sensors to enable this new capability....

Continue Reading
1.112
Views
0 Comments
Debugging Pico using SWD and UART with the new Raspberry Pi Debug Probe, at just $12
Raspberry PiTop Stories

Debugging Pico using SWD and UART with the new Raspberry Pi Debug Probe, at just $12

The Raspberry Pi Debug Probe is a comprehensive USB-to-debug kit that provides the necessary hardware for solderless, plug-and-play debugging. It is inspired by the trend where electronics enthusiasts used one Raspberry Pi Pico to debug programs running on another Pico board and...

Continue Reading
1.150
Views
0 Comments
CAP-XX launches ultra-thin prismatic supercapacitor for space-constrained devices
PowerTop Stories

CAP-XX launches ultra-thin prismatic supercapacitor for space-constrained devices

CAP-XX, a manufacturer of ultra-thin prismatic, cylindrical, and Lithium-Ion supercapacitors, has launched its DMV750 ultra-thin 2.2mm prismatic 3V supercapacitor. The ultra-thin 3V prismatic supercap can efficiently store and release the energy needed to drive peak-power functions...

Continue Reading
1.067
Views
0 Comments
Ortur Laser Master 3 Engraver Review
LaserTop Stories

Ortur Laser Master 3 Engraver Review

Introduction Laser engraving and cutting have been a key part of rapid and precision prototyping and production processes since the machines became widely available. They allow users from the comfort of their homes or mini-workshops to build precision products and engrave them at a...

Continue Reading
1.116
Views
0 Comments
Exploring The All New ATEZR P20 Plus 20W Laser Engraver 
LaserTop Stories

Exploring The All New ATEZR P20 Plus 20W Laser Engraver 

ATEZR P20 PLUS Laser Cutter Machine Atezr P20 Plus Laser Engraving Machine is a machine designed specifically for laser engraving. The name of the machine, however, is deceptive. And it's not just limited to that, either. You can use the P20 to engrave on a variety of substrates,...

Continue Reading
1.079
Views
0 Comments
High-performance, Inductor Built-in Step-up “micro DC/DC” Converter XCL104/XCL105 Series
PowerTop Stories

High-performance, Inductor Built-in Step-up “micro DC/DC” Converter XCL104/XCL105 Series

Torex Semiconductor Ltd. has launched a high-performance, 1.4A inductor built-in step-up “micro DC/DC” Converter— XCL104/XCL105 series. The XCL104/XCL105 series is a synchronous step-up “micro DC/DC” converter with a built-in 1.4A driver and a built-in coil that is...

Continue Reading
1.064
Views
1 Comments
Espressif Systems ESP32-C6-WROOM-1 Multiprotocol Modules
McuTop Stories

Espressif Systems ESP32-C6-WROOM-1 Multiprotocol Modules

Espressif Systems ESP32-C6-WROOM-1 Multiprotocol Modules are general-purpose Wi-Fi®, IEEE 802.15.4, and Bluetooth® LE modules. These multiprotocol modules are built around the ESP32-C6 series of SoCs and 32-bit RISC-V single-core microprocessors featuring 4MB flash. The...

Continue Reading
1.075
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives