Interactive LED Coffee Table – Arduino Compatible

Interactive LED Coffee Table – Arduino Compatible

The project demonstrated here is an IR proximity sensor-based LED light, mainly designed for interactive coffee tables, but also can be used as single interactive light. The table can be made with multiple of these PCBs. Multiple tiles can be used as shown in the image below, each...

Continue Reading
1.055
Views
0 Comments
Mini Robot Controller Using Infra-Red Remote for Small and Medium Size Robot

Mini Robot Controller Using Infra-Red Remote for Small and Medium Size Robot

The Robot Controller is a very compact solution for controlling small and medium size robots using an Infrared remote. The project is fully Arduino compatible and consists of an ATMEGA328 microcontroller, 2 x BD6211 motor drivers, TSOP1838 IR sensor. BD6211 H-bridge is a full bridge...

Continue Reading
1.077
Views
0 Comments
Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible

Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible

This DC Motor controller provides direction and speed control of brushed DC Motor using Rotary Encoder. This is Arduino compatible hardware that consists of LMD18201 DC motor driver chip, Atmega328 microcontroller, Rotary Encoder, L317 regulator, and other components.  Hardware...

Continue Reading
1.218
Views
0 Comments
2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible

2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible

This is an Arduino compatible board that contains an Atmega328 microcontroller and Bipolar Stepper Motor Driver chip STK682-010. This Hybrid IC from ON Semiconductor can deliver up to 2.5A current and it can have an input supply up to 32V DC. It has multiple micro-stepping options...

Continue Reading
1.218
Views
0 Comments
Arduino 3-Digit 0.5″ Common Cathode 7 Segment Display Module

Arduino 3-Digit 0.5″ Common Cathode 7 Segment Display Module

This project will help you to easily develop an Arduino compatible project that requires 3 x 7-Segment 0.5" displays. These are common cathode displays that use multiplexed configuration, BC847 transistor drives 3 x common cathodes, all display segments are connected to the...

Continue Reading
1.136
Views
0 Comments
Arduino 2-Digit 0.5″ Common Cathode 7 Segment Display Module

Arduino 2-Digit 0.5″ Common Cathode 7 Segment Display Module

This is an Arduino compatible board for creating 2 Digit Display projects. The circuit operates with 5V DC, Connector CN1 is provided for bootloader programming and Arduino firmware upload. A new Atmega328 chip requires a bootloader and Arduino firmware programming, Connector CN1...

Continue Reading
1.132
Views
0 Comments
4-Channel Remote Receiver Using NRF24L01 Radio Module – Arduino Compatible

4-Channel Remote Receiver Using NRF24L01 Radio Module – Arduino Compatible

Controlling 4 devices using an RF remote is very easy with this project. This is an Arduino compatible project. NRF24L01 module, Atmega328 microcontroller, 3.3V regulator, and few other components are part of the project. Onboard power LED and an additional functional LED is provided....

Continue Reading
1.386
Views
1 Comments
Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible

Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible

This is an easy-to-make LED dimmer using RF remote control. The project is capable of driving a load up to 24W (2A X 12V LED). Any 12V single or 12V LED strip can be used. This is an open-source Arduino compatible hardware that has Atmega328 microcontroller, Potentiometer, MOSFET, 5V...

Continue Reading
1.673
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives